ANDREWS

Leva Andrews EV27 Evo

Caracteristicas: These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and ...

Caracteristicas: These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatBolt-in street cam with fast open and close rampsUses stock springs; works with carbs or fuel injectionPulls from 1500 to 6000 rpmSimilar timing to EV3, but designed to produce a very broad torque bandMust check coil bind, valve-to-valve clearance and valve-to-piston clearance.Made in the U.S.A.Peso: 2.08 Alto: 3.14 Largo: 6.25 Ancho: 3.14 Aditamentos:FXR 3 : 1999FXR 2 : 1999Softail ...

Andrews .105" Gage Pins

Caracteristicas: Used to measure the outside diameter of cam drive gearsMade in the U.S.A.There a...

Caracteristicas: Used to measure the outside diameter of cam drive gearsMade in the U.S.A.There are two basic differences between 90-99 cam gear sizes and earlier years. The overall range of gear pin measurements (from the largest gears to the smallest) was reduced in '90 from .006" to .003". The large gears are the same size for both 84-89 and 90-99 (green and black color codes). Gear size measurements (over pins) are listed in the 1990 H-D manual using .108" pins instead of .105" pins (as f...

Juego de Levas Andrews TC

Caracteristicas: Cams work well with fuel injection or carburetor modelsRun best with low restric...

Caracteristicas: Cams work well with fuel injection or carburetor modelsRun best with low restriction exhausts (1700-5200 rpm)Works well with carbs or fuel injectionBolt-in cam for more torque with stock compressionCan be used with stock valve springs and tappetsSimilar to the EV-23 camAll Andrews gear-driven cams require four-gear set for installation (DS-199532 for 99-06 applications; 0925-0166 or 0925-0152 for 07-17 Twin Cam and 06 Dyna applications).Installer must check coil bind, valve-t...

Juego de Levas Andrews Dyna - TC

Caracteristicas: Cams work well with fuel injection or carburetor modelsRun best with low restric...

Caracteristicas: Cams work well with fuel injection or carburetor modelsRun best with low restriction exhausts (1700-5200 rpm)Works well with carbs or fuel injectionBolt-in cam for more torque with stock compressionCan be used with stock valve springs and tappetsSimilar to the EV-23 camAll Andrews gear-driven cams require four-gear set for installation (DS-199532 for 99-06 applications; 0925-0166 or 0925-0152 for 07-17 Twin Cam and 06 Dyna applications).Installer must check coil bind, valve-t...