Caracteristicas:

Designed with a combination of shorter durations and higher lifts to offer the advantages of a broad torque output through the entire rpm range

Designed for hydraulics, but could be run with solids

Grind #1 is the low-compression version of an "A" grind cam for 74" and 80" models

Made in the U.S.A.

On late 77 and later engines, the pitch diameter on the camshaft, pinion gear and breather valve gear was changed. These components are not interchangeable with earlier style components unless replaced in sets only. Late 77 and later gear sets are identified by a circular groove machined in the outer face of the cam gear.

Peso: 1.9
Alto: 3.39
Largo: 6.16
Ancho: 3.79
Aditamentos:

Electra Glide FL : 1973-1976-1977-1970-1974-1972-1975-1971

1200 Super Glide FX : 1971-1977-1972-1973-1976-1975-1974

1200 Super Glide FXE : 1976-1975-1977-1974

1200 Electra Glide FLH : 1977-1970-1974-1975-1972-1973-1971-1976

1200 Low Rider FXS : 1977

Specs:Application: Intake
Exhaust Close: 15°
Exhaust Lift at TDC: Shovel: 0.133" Pan: 0.133"
Grind: #2
Intake Close: 35°
Intake Open: 15°
Application: Exhaust
Intake Lift at TDC: Shovel: 0.133" Pan: 0.133"
Exhaust Duration: 230°
Exhaust Lift: Shovel: 0.490" Pan: 0.512"
Product Name: Cam
Riding Style: Street
Exhaust Open: 35°
Intake Duration: 230°
Intake Lift: Shovel: 0.490" Pan: 0.512
Units: Each